Get those gasses flowing with the Oxygen/Acetylene or propane torch reel. Each Magnum reel offers a smooth wrap onto the shaft with strain/tension relief; keeping hard angles to a minimum and strain off your hoses helps them last longer. The end cap can be easily adjusted in 30-degree intervals, giving you the freedom to customize your mounting needs. This means you can position the feed at any angle that suits your setup, all while avoiding kinks.
Each Magnum reel offers a smooth wrap onto the shaft with strain/tension relief, ensuring the protection and longevity of your hoses. The end cap can be easily adjusted in 30-degree intervals, giving you the freedom to customize your mounting needs. This means you can position the feed at any angle that suits your setup, all while avoiding kinks.
There are 2 ports; each is a female thread 1/4"NPT. One set on the shaft and endcap. Replaceable o-rings, located in the endcap, are a standard -224 size. However, we ship them with a proprietary self-lubricating o-ring rated to +225°F all the way down to -45°F, providing you with peace of mind in any weather condition.
Each Magnum reel is built to last. It is fully sealed, with the bearings and rotary parts residing inside a sealed housing. Each bearing is rated to over 6,500lbs dynamic load and is filled with a low friction grease, ensuring its performance in extreme conditions. We use a heavy-duty lip seal to seal the shaft to the base and o-rings to seal the other components, keeping grinder dust and other elements out of your reels. This design makes our reels cold and hot weather safe, instilling confidence in their reliability. We back this up with a lifetime warranty.
The finish on the parts is hard anodizing, which increases surface hardness by ~ 4x. The anodizing prevents the galvanic corrosion naturally occurring when aluminum and stainless meet; we also apply a silver never-seize during assembly. All of the aluminum used in the construction of the reels is 6061-T6 and is North American aluminum.
Pipeline welders designed our reels and can withstand the harshest conditions, tried and tested; one of the reasons we have custom-created a twin-bearing easy grip handle to make the last job of the day a little easier.
Interchangeable end plates for increased hose capacity (sold Separately)
*hose not included
Capacity:
Large
150' of 2 x 1/4" hose
Medium
120' of 2 x 1/4" hose
Small
75' of 2 x 1/4" hose
Mounting Instructions:
https://magnumreels.com/pages/mounting-instructions
